Daniel Hertz
Daniel Hertz Chiara
Call for Special Pricing!
€23,000.00
- Aerostriction Tweeters.
- 8" Woofer.
- Precision Crossover designed by Mark Levinson.
- Marine Grade Plywood cabinet.
- Frequency response from below 20Hz to 20kHz; dynamic range of 112dB SPL.
Chiara Ultra Dimensional Speakers
The Chiara faithfully reproduces the sound of instruments and voices with stunning accuracy that enables you to clearly hear the acoustic detail of the performance space. Chiara's hand built Aerostriction Tweeters and 8" Woofers are the products of decades of intense engineering and artisanal craftsmanship , made in small quantities without compromise and are available exclusively from Daniel Hertz. It can be driven full range 2 channel or bi-amplified 4 channel.
Mark Levinson personally designed the Aerostriction Tweeters to produce the widest sound stage available. Chiara has an exclusive 8" woofer, handmade by Daniel Hertz, with a resonant frequency of 27Hz. This enables it to faithfully reproduce the main body of recording and it pairs beautifully with the open sound of the exclusive Aerostriction Tweeters. The pairing of these drivers means that the Chiara is capable of seamlessly reproducing sound from below 20Hz all the way through 20Khz with a dynamic range of 112db SPL.
Specifications
Height
693 mm(27.2 inches)
Width
333 mm (13.1 inches )
Depth
277 mm (10.9 inches)
Weight
19 kg (41.8 pounds)
"Chiara doesn't look like a normal speaker because it isn't one. In addition to faithfully reproducing the sound of all acoustic instruments and voices, Chiara reproduces the space they are in. You are in the room with the musicians."
~ Mark Levinson
Daniel Hertz Maria 350
Call for Special Pricing!
€12,000.00
- Daniel Hertz Mighty Cat™ Audio Chip with C-Wave™.
- Digital to analog conversion with no seperate DAC.
- 3 analog (1 meg ohms) inputs, USB, coax, wi-fi, Bluetooth.
- 2 Channel power amplifier.
- 150 Watts per channel (8 ohms).
- 300 Watts per channel (4 ohms).
- Bluetooth and Wi-Fi enabled.
- Internal tuneable Headphone amplifier.
- Custom Daniel Hertz speaker connectors.
- Hand-built mirror black finished Perspex chassis.
- Hand-polished stainless steel knobs and buttons.
Maria Amplifiers
The Mighty Cat™ Class D chipset is at the heart of all Maria Amplifiers . It is a DAC with an analog power output with a native resolution of 384kHz. Mighty Cat™ has the most elegant and shortest signal path possible, eliminating signal degradation by multiple chassis systems with many meters of cable, power supplies and loading issues.
Mighty Cat™ has no audible noise. High output current and low output impedance enable Mighty Cat™ to drive all high-quality speakers with ease. Power supply regulation, a rare and costly feature of only a few pure analog amplifiers, is provided by a state-of-the-art SMPS (switching mode power supply), enabling rock-solid bass, astonishing punch and dynamics, and pin point imaging. Three analog inputs have one megohms input impedance, an innovation introduced by Mark Levinson, which eliminates the loading of analog source devices.
Specifications
Power output, two channels:
200W per channel at 8 ohms.
400W per channel at 4 ohms.
Frequency response:
5 Hz - 30 kHz
Native resolution:
384 kHz PWM, 3ns
AC Power input:
90V - 250 V
Dimensions:
Height:
110mm (4.33'')
Width:
430mm (16.93'')
Depth:
330mm (12.99'')
Weight:
6kg (13 lbs)
Fuse: 15 A
Digital inputs:
Bluetooth, digital coaxial, USB Audio 2.0, WIFI
Bluetooth (wireless):
24 bit, 48 kHz
Digital Coaxial:
24 bit, 192 kHz
USB Audio Class 2.0
24 bit, 192 kHz
Analog inputs:
stereo RCA, 3 pairs with 1 megohms input impedance
Analog outputs:
Left and right channel speaker outputs via Daniel Hertz speaker connectors.
Headphone output via front panel 1/4" phone jack.
"Maria 50 surpasses the expectations of the most demanding listeners, bringing out the best in all speakers and headphones, regardless of size or cost."
~ Mark Levinson
Daniel Hertz Maria 800
Call for Special Pricing!
€33,000.00
- Daniel Hertz Mighty Cat™ Audio Chip with C-Wave™.
- 3 analog inputs (1 meg ohms), USB, coax, wi-fi - Bluetooth
- Digital to analog converter, no separate DAC
- 4 Channels with active crossovers for Bi-Amplification
- 200 Watts per channel (8 ohms),
- 400 Watts per channel (4 ohms)
- 800 Watts per channel in 2 channel Bridge Mode (8 ohms)
- Bluetooth and Wi-Fi enabled.
- Internal tunable Headphone amplifier.
- Custom Daniel Hertz speaker connectors.
- Hand-built mirror black finished Perspex chassis.
- Hand-polished stainless steel knobs and buttons.
Maria 800
Mark Levinson personally designed the Maria 800 to deliver a no compromise amplifier for speakers that require bi-amplification. The Maria 800 can also be operated in bridge mode to deliver 800 watts per channel, 2 channels.
The Maria 800 has fully programmable active crossovers with laboratory grade algorithms that enable precision tuning in .1dB increments required for bi-amplifying speakers without compromise.
The Mighty Cat™ Class D chipset is at the heart of all Maria Amplifiers . It is a DAC with an analog power output with a native resolution of 384kHz. Mighty Cat™ has the most elegant and shortest signal path possible, eliminating signal degradation by multiple chassis systems with many meters of cable, power supplies and loading issues
Mighty Cat™ has no audible noise. High output current and low output impedance enable Mighty Cat™ to drive all high-quality speakers with ease. Power supply regulation, a rare and costly feature of only a few pure analog amplifiers, is provided by a state-of-the-art SMPS (switching mode power supply), enabling rock-solid bass, astonishing punch and dynamics, and pin point imaging. Three analog inputs have one megohms input impedance, an innovation introduced by Mark Levinson, which eliminates the loading of analog source devices.
Specifications
Power output, four channels:
200W per channel at 8 ohms.
400W per channel at 4 ohms.
Frequency response:
5 Hz - 30 kHz
Native resolution:
384 kHz PWM, 3ns
AC Power input:
90V - 250 V
Dimensions:
Height:
110mm (4.33'')
Width:
430mm (16.93'')
Depth:
330mm (12.99'')
Weight:
6kg (13 lbs)
Fuse: 15 A
Digital inputs:
Bluetooth, digital coaxial, USB Audio 2.0, WIFI
Bluetooth (wireless):
24 bit, 48 kHz
Digital Coaxial:
24 bit, 192 kHz
USB Audio Class 2.0:
24 bit, 192 kHz
Analog inputs:
stereo RCA, 3 pairs with 1 megohms input impedance
Analog outputs:
Left and right channel speaker outputs via Daniel Hertz speaker connectors.
Headphone output via front panel 1/4" phone jack.
Active crossovers:
Left and right high pass
Left and right high pass
Fully programmable crossover frequencies, slopes, levels, and time delays. Resolution in steps of .1dB.
"Maria 800 is essential for creating the world's finest music systems which are by definition, bi-amplified."
~ Mark Levinson
Daniel Hertz Plexi Stands
Call for Special Pricing!
€3,000.00
- Designed to provide stable support and excellent acoustic properties for Chiara, Max and Eva speakers.
- Covered groove in the rear of the vertical post hides the speaker wire.
- Hand made from solid, top quality European manufactured plexiglass.
- 8kg (17.6 lb) per stand provides the stability required for Daniel Hertz high performance speakers.
Daniel Hertz Clear Plexiglass Speaker Stands
Daniel Hertz clear plexiglass stands are designed to match the elegant and minimalist design of Chiara, Max and Eva. The clear acrylic eliminates visual mass, making the speakers float in the air, while providing the weight and stability required for best acoustic performance.
Daniel Hertz clear plexiglass speaker stands are cut and machined from 50mm thick European made plexiglass and include stainless steel screws to fasten the top base and bottom base to the vertical post, and the top base to the speaker.
These speaker stands are made in Italy by skilled artisans, with hours of machining and hand polishing to achieve flawless finish and quality of the Daniel Hertz Chiara, Max and Eva speakers.
Specifications
Height: 675mm (26.5")
Width: 400mm (15.7")
Depth: 450mm (17.7")
Weight: 13.4 kg (29.5 lb)
"I designed Daniel Hertz clear plexiglass stands without regard for cost, to enable Chiara, Max and Eva to perform to full potential, and to enable them to float in the air, as the music does."
~ Mark Levinson
Daniel Hertz black stands
Call for Special Pricing!
€1,500.00
- Designed to provide stable support and excellent acoustic properties for Chiara, Max and Eva speakers.
- Covered groove in the rear of the vertical post hides the speaker wire.
- Classic, minimalist design blends with a wide range of interior designs.
- 8kg (17.6 lb) per stand provides the stability required for Daniel Hertz high performance speakers
Daniel Hertz Speaker Stands
Daniel Hertz black wood speaker stands have four holes in the top that align with four holes in the base of Daniel Hertz Chiara, Max and Eva speakers.
Stainless steel screws (included) fasten the top base and bottom base to the vertical post, and the top base to the speaker
Daniel Hertz wood speaker stands are made in Italy by skilled artisans, with black matte finish perfectly matching the finish and quality of Daniel Hertz Chiara, Max and Eva speakers. The speaker wires fit in a groove in the rear of the vertical post. A black wood cover plate screws on to hide the speaker wires.
Specifications
Height: 675mm (26.5")
Width: 400mm (15.7")
Depth: 450mm (17.7")
Weight: 9kg (19.8 lb)
"I designed Daniel Hertz black wood stands to enable Chiara, Max and Eva speakers to enable excellent performance, be placed at the right height, match the design of the speakers, and harmonize with the decor of almost any listening room."
~ Mark Levinson